|
Smoke Detectors
 Return to Previous
Page
 The
FIREX team is dedicated to excellence. Excellence in
engineering, excellence in product integrity, excellence
in service. These core competencies have made Firex an
industry leader in fire safety devices for the past 20
years. For further model information, please click on
the following: 0465C,
0480C, 120C,
0406C,
0418C, 0428C,
0484C, 04518C,
0499C, 501,
10000C
(10400C), 10200C,
12000C (12400C).
 American
Sensors products have supplied customers with years of
dependability, quality and accuracy. Their manufacturing
and engineering departments are dedicated to maintaining
the high standards associated with our brand name and
continue to produce products that perform with proven
reliable results in the important goal of saving lives.
For further model information, please click on the
following: ESA5011,
ASD 100, ASD
200, SA 360,
SA 900, CB100.
 Whether
you're wiring new construction, planning a remodel or
addition, or replacing product as part of regularly
scheduled maintenance, install BRK Electronic products
with confidence! Every product we offer is designed with
contractor-preferred features to save you time and
effort. Their products are manufactured and tested to
the highest quality standards, and pass stringent
requirements. For further model information, please
click on the following:
BRK 100SA,
BRK 9120A~BA, BRK
7010A~BA, BRK PSM1A,
BRK RM4,
SC9120A~BA, SC01,
CO5120.
 Properly
installed and maintained, residential smoke alarms are
one of the best and least expensive ways to provide an
early warning when a fire begins. Smoke alarms save
lives, prevent injuries and minimize property damage by
alerting residents early to a fire hazard. For further model information, please
click on the following:
P1235CA,
0916KCA,
P1275CA, PE9KCA,
PPE120CA,
SM120X, 9C05,
900-0132,
900-0119, 900-0133.
If you require further assistance, please click
here,
fill in the appropriate fields, specify the subject, and
push the send button. We will respond to your inquiry in
1 to 2 business days.
|
(9V)
|
The Firex
0465C smoke alarm is an ionization 9V
battery powered smoke alarm. It has an
85 decibel horn, test switch, low battery
signal, and a lighted power/alarm LED
indicator; the LED flashes once per minute
indicating it is receiving power. When in
alarm, the LED flashes rapidly once per
second.
 |
PDF |
|
(9V)
|
The Firex
0480C is a photoelectric smoke alarm,
which has an 85 decibel horn, test switch,
and lighted power/alarm LED indicators. 9V
DC Battery Powered with a green lighted LED
that “blinks” once per minute to confirm DC
power and once per second in alarm. Includes
a 30 day low battery indicator.
|
PDF |
|
(9V)
|
This Firex 9V
ionization smoke alarm features easy
installation (no wiring required – battery
only), test button, 9V battery (included)
and a Five Year Limited Warranty.
|
PDF |
|
(120V)
|
This Firex
120V AC ionization smoke alarm has an
85 decibel horn, test switch and a lighted
power/alarm LED indicator; the LED flashes
once per minute to confirm AC power. When in
alarm, the LED flashes rapidly once per
second. When interconnected with other Firex
smoke alarms, the unit that initiates an
alarm will display the rapidly flashing LED
while the other interconnected alarm LEDs
remain extinguished. 6 Station
interconnect.
|
PDF |
|
(120V)
|
This Firex
120V AC ionization smoke alarm has an
85 decibel horn, test switch and a lighted
power/alarm LED indicator; the LED flashes
once per minute to confirm AC power. When in
alarm, the LED flashes rapidly once per
second. When interconnected with other Firex
smoke alarms, the unit that initiates an
alarm will display the rapidly flashing LED
while the other interconnected alarm LEDs
remain extinguished. 18 Station
interconnect.
|
PDF |
|
(120V)
|
This Firex
120V AC ionization smoke alarm has an
85 decibel horn, test switch and a lighted
power/alarm LED indicator; the LED flashes
once per minute to confirm AC power. When in
alarm, the LED flashes rapidly once per
second. When interconnected with other Firex
smoke alarms, the unit that initiates an
alarm will display the rapidly flashing LED
while the other interconnected alarm LEDs
remain extinguished. 18 Station
interconnect – LINE VOLTAGE INTERCONNECT
TRIGGER.
|
PDF |
|
(120V)
|
The Firex
0484C is a photoelectric smoke alarm,
which has an 85 decibel horn, test switch,
and lighted power/alarm LED indicators. It
can be interconnected with Firex ionization
as well as photoelectric smoke alarms for
the best smoke detection system. 120V AC
Direct Wire for single or multiple station
use. The 0484C is interconnectable up to 12
Firex AC smoke alarms. A green lighted LED
”blinks” once per minute to confirm constant
AC power and once per second when in alarm.
|
PDF |
(120V,
Battery Back up)
|
The Firex
04518C Smoke Alarm is an ionization 120V AC
smoke alarm with battery back-up for single
or multiple station use. It includes a Quick
Quiet False Alarm Control feature which
allows the user to quiet an unwanted alarm
for up to 15 minutes. The 4518 has an 85
decibel horn, test switch and separate
lighted power and alarm LED indicators; the
green ”power on” LED confirms constant AC
power and the red LED displays alarm/battery
status.
|
PDF |
|
The 0499C is a
relay that can be used with our AC-powered
alarms to activate auxiliary devices, such
as lights, sirens, exit signals, escape
lights, exhaust fans and other AC-powered
devices.
|
PDF |
|
The 501
Multi-Function Relay Module works with Firex
Smoke, CO and combination Smoke/CO alarms,
activating door closers, fans, strobe lights
and other secondary devices that will alert
hearing-impaired individuals and other
occupants that a smoke and/or CO alarm
signal has sounded. The Multi-Function Relay
Module can be interconnected with up to 18
compatible devices.
|
PDF
|
(120V, Battery Back up)
10400C (120V) |
The 10000C
AC/DC and 10400C AC-only Carbon Monoxide
Alarms verifies that carbon monoxide sensor
is working properly, and warns when the
sensor is nearing the end of its service
life and interconnects with most Firex smoke
and CO alarms.
|
PDF |
(9V) |
The 10200C is
a 9V battery operated Carbon Monoxide alarm,
which includes an exclusive monthly self
test silent internal test (verifies
operation), front load battery door (for
convenient battery replacement), ramp up
horn (which protects your hearing when
testing), quick quiet false alarm control
(which silences non-emergency alarms), smart
quiet (silences a low battery alert for up
to 8 hours) and latching LED (identifies the
trigger alarm).
|
PDF |
12000C
(120V, Battery
Back Up)
12400C (120V)
|
The 12000
AC/DC and 12400C AC-only combination alarms
monitor both smoke and CO emissions.
Electrical contractors can easily satisfy
most building requirements for fire and CO
protection with a single unit, reducing
installation costs. Smart Interconnect
Wiring allows the 12000 to be connected to
additional smoke alarms and CO alarms on a
single interconnect wire eliminating the
need for additional wiring and providing
whole-house protection.
|
PDF |
|
 |
|
|
120 Volt
ionization smoke alarm with built-in
"NO/NC Form C" Relay, automatic alarm reset
feature, alarm source indicator,
interconnectable up to 18 units, alarm and
power test feature and LED's, tamper
resistant "Lock-it" key mounting hardware
included, 10 Year Limited Warranty.
|
PDF |
|
|
12/24 Volt AC
or DC ionization smoke alarm
Interconnectable with Built-in Relay, with
built-in "NO/NC Form C" Relay, Automatic
alarm reset, Alarm source indicator, Up to
12 units can be interconnected, Tamper
Resistant "Lock-it" key mounting hardware
included, Alarm and power test feature and
LED's, 10 Year Limited Warranty.
|
PDF |
|
|
The American
Sensors ASD200, 12/24 Volt AC or DC hardwire
smoke alarm with built-in relay, is an all
purpose "low voltage" smoke alarm
incorporating advanced photoelectric
technology for sensing visible and invisible
particles of combustion. The built-in relay
makes the ASD200 an easy choice for "system
applications", where auxiliary devices are
required. Up to 12 units can be
interconnected for simultaneous warnings,
and the built-in relay will automatically
reset at the conclusion of an alarm
condition.
|
PDF |
|
SA360 |
The SA360 is a
general purpose 120 Volt AC hardwire smoke
alarm. This unit utilizes reliable
"dual-ionization" technology and can be
interconnected up to 18 units. The SA360
also adds the "alarm source indicator"
feature, which easily identifies the
originating unit in an alarm condition.
|
PDF |
|
SA900 |
The American
Sensors SA900 "Long Life" smoke alarm with
Easy TouchTM Alarm-Pause feature is a
lithium battery powered unit utilizing
reliable "dual-ionization" technology. The
lithium battery provides continuous
protection and eliminates the need for
battery replacement for up to 10 years. The
unit is suitable for installation in any
room of the residence, especially the
kitchen.
|
PDF |
|
CB100 |
The CB100 Auxiliary Relay is used to connect
a compatible Dicon American Sensors smoke or
CO2 detector to an auxiliary device such as
an alarm panel, fire panel, shut-off valve,
etc). It must be installed in a junction box
by a licensed electrician. A unique design
allows it to be "field selectable" for use
with smoke signal only, CO signal only, or
combined. For use with SA360, SA379, ESA5011
and COS2010. This module is also
Interconnectable with the Dicon smoke alarms
570L, 570LR, 570LC or 370LB. Refer to
installation instructions for these units.
ULC approved for use in Canada only. Maximum
load 10A 120VAC or 28VDC.
|
PDF |
|
|
BRK 100S is a
single and/or multiple station
120V AC ionization smoke alarm
specifically designed for residential and
institutional applications including
sleeping rooms of hospitals, hotels, motels,
dormitories, and other multifamily
dwellings, and is designed to give reliable
early warning of fire by providing a visual
and audible alarm when the unit senses smoke
from fire via a 177 candela Xenon strobe
and an 85dB piezoelectric horn.
|
PDF |
|
(120V)
BRK 9120BA
(120V, Battery
Back Up)
|
120V AC
ionization smoke alarm. Designed for the
fastest possible installation. Stylish,
compact shape fits with any décor. Can be
interconnected with up to 11 additional BRK
smoke detectors and 6 compatible devices
such as bell, repeaters, or switches.
Includes Latching Alarm Indicator, Smart
Technology, Single Button Test/Silence,
Perfect Mount System, Mounting bracket lock
and Dust Cover. Model BRK 9120BA
includes a 9V battery backup.
|
PDF |
|
(120V)
BRK 7010BA
(120V, Battery
Back Up) |
The BRK 7010A
is a wire-in, 120 VAC 60Hz single and/or
multiple station smoke alarms specifically
designed for residential and institutional
applications including sleeping rooms of
hospitals, hotels, motels, dormitories and
other multi-family dwellings as defined in
standard NFPA 101. Both models comply with
UL217, CSFM, NFPA 72, HUD, FHA and other
agencies that model their codes after the
above agencies. It meets building codes
where AC or AC/DC smoke alarms are
required. Model BRK 7010BA includes a 9V
battery backup.
|
PDF |
|
Interface module used to connect N.O.
devices to Smoke Alarms. Use with 100SA,
9120 and 7010.
|
PDF
N/A |
|
|
Designed to activate an auxiliary device
like a bell, siren, strobe light, exhaust
fan, alarm panel, or door closer when alarm
is sounded. Now works with "Smart
Interconnect" BRK CO alarms. The RM4 has
form-C contacts that, once connected to BRK
120volt AC alarms, automatically activate
whenever the alarm sounds and will
automatically deactivate when the alarm
shuts off. Meets UL 317, UL2034 and UL539
for accessories.
|
PDF |
|
(120V)
BRK SC9120BA
(120V, Battery
Back Up) |
120 volt hardwire , Dual protection -
CO/Smoke, Intelligent Sensing
Technology, microprocessor controlled to
reduce nuisance alarms, Ionization
Technology, Interconnectable up to 18 units
(smoke and combination units combined),
Alarm latch indicator automatically
identifies which unit initiated an alarm,
Single button test/silence eliminates
confusion, Automatically performs internal
self-tests.
|
PDF |
|
|
The SC01 detects high levels of CO2
with additional protection from smoke.
Battery Powered, unique horn sounds and
lights (helps distinguish between a smoke or
CO incident), silence/test button, hinged
battery drawer, blinking power indicator,
loud 85 - decibel alarm, low battery
warning, 9V battery included.
|
PDF |
|
|
The BRK CO5120 is a wire-in, 120 VAC/DC,
60Hz with 9V battery backup single and/or
multiple station carbon monoxide alarm
specifically designed for residential and
institutional applications including
sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family
dwellings.
|
PDF |
|
|
P1235CA |
This basic smoke alarm features ionization
Technology (better at detecting fast flaming
fires), 120V AC Direct-Wire (Interconnects
with up to 24 units, of which 18 can be
initiating), Test Button (Tests circuitry
and verifies alarm operation),
Interconnectable (ANY unit that senses a
problem automatically triggers ALL units
throughout the home immediately, allowing
extra time for escape), and Quick Connect
(installs quickly with snap-on wire
harness).
|
PDF |
|
0916KCA |
This battery powered smoke detector
from Kidde features ionization
detection for fast flaming and other fires
and is value priced to make it easy to
protect your family with at least one on
every level of your home. This model
features a special hush feature to silence
nuisance alarms so you won't be tempted to
remove the batteries. It's easy to install
and ships with a 9V battery included.
|
PDF |
|
P1275CA |
This basic smoke alarm features
ionization Technology (better at
detecting fast flaming fires), 120V AC
Direct-Wire (Interconnects with up to 24
units, of which 18 can be initiating), Test
Button, Interconnectable (ANY unit that
senses a problem automatically triggers ALL
units throughout the home immediately,
allowing extra time for escape), Quick
Connect (installs quickly with snap-on wire
harness), and 9V battery backup (battery
included).
|
PDF |
|
PE9KCA |
This battery powered smoke detector
from Kidde features Photoelectric
Technology (better at detecting slow
smoldering fires). This model features a
test button, low battery indicator, and
special mounting bracket (allows for fast
installation). Ships with a 9V battery
included.
|
PDF |
|
PPE120CA |
This smoke alarm features Photoelectric
Technology (better at detecting slow
smoldering fires), 120V AC Direct-Wire
(interconnects with up to 24 units, of which
18 can be initiating), 9V Battery Backup
included (continuous protection in case of
power failure), Test Button (tests circuitry
and verifies alarm operation), Low Battery
Indicator (warning chirp sounds when battery
needs replacement), Interconnectable (ANY
unit that senses a problem automatically
triggers ALL units throughout the home
immediately allowing extra time for escape).
|
PDF |
|
|
The Kidde 9C05 battery operated carbon
monoxide alarm utilizes sophisticated
electronic components to protect you and
your family from the dangers of carbon
monoxide. This alarm includes a snap-on
cover that give immediate access to the
batteries and a safety feature that makes it
difficult to close the cover without the
batteries being installed.
|
PDF |
|
|
General Purpose carbon monoxide alarm, ideal
for secondary protection, hardwire unit with
test and reset button to verify alarm
operation by pressing the test button to
perform a diagnostic test. Will interconnect
with other Kidde alarms.
|
PDF |
|
SM120X |
This optional relay activates or deactivates
auxiliary devices such as bells, lights and
ventilation systems. For use with all
interconnected installations that contain
smoke alarms and smoke / CO combo units and
heat detectors. The power supply portion of
this module can be used with manual pull
stations, flow switches, and spot type heat
detectors.
|
PDF |
|
|
This is a 120V hardwired combo smoke and
carbon monoxide detector. It features a
battery backup and a talking alarm. This
detector can be interconnected with up to 24
compatible units. Other features include a
"Hush" button to silence nuisance alarms,
and a test/reset button. It uses ionization
technology for smoke detection, and an
electromechanical CO detector.
|
PDF |
|
|
This is a 120V hardwired combo smoke
detector and carbon monoxide detector.
This detector can be interconnected with up
to 24 compatible units so all will sound
when one detects fire. Other features
include a "Hush" button to silence nuisance
alarms, and a test/reset button. It uses
ionization technology for smoke detection,
and an electromechanical CO detector.
|
PDF |
Copyright Serva-Lite Sales 2008 |